The first specifications of Wi-Fi 8 appear by mouth. The next generation does not promise a jump in speed, but it does promise more stable connectivity.
Wifi 7 has yet to appear good and proper, but there is already plenty of tinkering going on with the next Wi-Fi standard. MediaTek, one of the driving forces behind the development, grants a first look at Wifi 8 in a white paper. The suggested specifications are subject to change. The official Wifi 8 specification is not expected until September 2028.
The development of Wifi 8 is done from a different focus than Wifi 7. Wifi 7 is all about speed: theoretical throughputs are raised to 40 Gbps. Wifi 8 puts not speed, but “ultra-high reliability” in the user experience on the top shelf. The official name of Wifi 8 is IEE 802.11bn.
Stability first and foremost
At its core, Wifi 8 will not differ that much from Wifi 7. Wifi 8 will share the same frequency bands with its predecessors (2.4 GHz, 5 GHz, 6 GHz) and the same QAM modulation over a maximum channel width of 320 MHz. The maximum physical speed will also be maintained at about 23 Gbps, in theory. Wi-Fi 8, like any Wi-Fi standard, will be backward compatible.
So don’t expect a speed jump between Wi-Fi 7 and Wi-Fi 8. What the new Wi-Fi standard will change, however, is how a connected device interacts with the multiple access points on the network. In a white paper, MediaTek reveals some new features that Wifi 8 can use to improve connection stability:
- Coordinated Spatial Reuse: This feature is derived from Spatial Re use that was introduced in Wi-Fi 6, but the technology is more “mature. Access points communicate with each other to coordinate their power, which MediaTek says increases throughput by 15 to 25 percent.
- Coordinated beamforming: Beamforming is also not new in Wi-Fi, but in Wi-Fi 8 it will be better coordinated across access points. When two devices are close together, signals are “sent away” from the device that does not want to connect to the network for a stronger signal on the device that does seek connection. This increases throughput by twenty to fifty percent.
- Dynamic subchannel operation (DSO): DSO enables access points to distribute data more efficiently based on the capabilities of connected devices. Instead of treating each device equally, the router can now dynamically decide which device gets a specific subchannel depending on, for example, better Wi-Fi antennas or higher speed requirements. This means more advanced devices can download faster, increasing data throughput by up to 80 percent.
- Finer gradations in throughput: A WiFi router relies on the MCS Index (Modulation Coding Scheme) to determine the connection speed. This makes the connection speed higher or lower in different areas. MediaTek believes the jumps in the current coding scheme are too large and advocates finer gradations. This could improve the overall transmission speed by 5 to 30 percent.
From Wifi 7 to Wifi 8
MediaTek stresses that these features and specifications are far from final. The official standard will not be published until the fall of 2028 at the earliest. Then it will be several years before a new Wi-Fi standard becomes the norm.
First up is Wifi 7, and even Wifi 6 is far from being widely embraced by businesses. The first Wifi 7-compatible routers and devices have been available since late 2023, but the standard is not yet official. It should have been this year. The rollout of Wifi 7 should gain momentum next year.
